Will it scan? Let’s find out.

Point your camera at any QR code, or upload a photo. We’ll check it the way a phone would, before it goes to print. Free, no sign-up.

Checked in your browser. Nothing is uploaded or stored.

Scan it with your camera or upload a photo, and we’ll check contrast, inverted colours, density, blank margin and whether the page it opens still loads.

The usual reasons

Light code on a dark backgroundInverted codes look stylish but many phone cameras can't read them. Use dark dots on a light background.
Not enough contrastPale colours, metallic inks and shallow engraving all blur the difference between dots and background.
Too much packed into the codeA long link makes a crowded code with tiny dots. Shorten the link or use an editable code.
Printed too small for the distanceMake the code about a tenth of the scanning distance wide, and never under 2 cm.
No blank marginScanners need empty space around the code. Text or graphics touching it cause misreads.
Glare and shiny finishesGloss paper, laminate and glass reflect light. Matte scans better.
Blurry or stretched filesJPEG artefacts and stretched images soften the edges. Use SVG, PDF or a large PNG.
The page it opens is brokenThe code may be fine but the page moved or went down. Editable codes let you change it without reprinting.
Works for some people, not othersUsually inverted colours, low contrast or tiny dots: newer phones cope, older ones don't. Test on an older Android and an iPhone.

How big should it be?

  • In someone's hand (cards, packaging)2.5 cm wide
  • On a table or counter4 cm wide
  • On a wall poster15 cm wide
  • In a shop window20 cm wide
  • On a yard or street sign40 cm wide
  • Across a room or street80 cm wide

Laser engraving a QR code

Burn spread fills in small dots, and many surfaces engrave light marks on dark. Koobivo’s engraving mode uses bigger dots, a thicker margin and crisp vector files.

  • Laser on wooddots ≥ 0.6 mm
  • Laser on metaldots ≥ 0.35 mm
  • Laser on glassdots ≥ 0.7 mm
  • Laser on acrylicdots ≥ 0.5 mm
  • Laser on leatherdots ≥ 0.8 mm

Always run a test piece and scan it with two different phones before engraving the batch.

Make an engraving-ready code